In the high-end event rental market, the stability of a display system and the quality of its image output are the decisive factors behind project delivery. This technical review examines a P2.604 LED display system built from 12 cabinets, outlining its configuration and performance envelope for rental operators and on-site technicians.
The system is assembled from die-cast aluminum cabinets measuring 500mm by 1000mm, producing an overall display area of roughly 3.0 meters wide by 2.0 meters high (9'10" by 6'7").
The cabinet structure is built around die-cast aluminum, a choice that supports both structural rigidity and heat dissipation during extended operation. Each cabinet measures 500mm by 1000mm, and the 12-cabinet configuration yields a display surface of approximately 3.0 meters by 2.0 meters.
At 2.604mm pixel pitch, the panel uses SMD1415 light-emitting diodes arranged across modules with a resolution of 96 by 96 pixels. The system is driven at a 1/32 scan rate and a refresh rate of 3840Hz.
| Parameter | Specification |
|---|---|
| Pixel pitch | 2.604mm |
| LED type | SMD1415 |
| Refresh rate | 3840Hz |
| Scan mode | 1/32 |
| Cabinet size | 500mm x 1000mm |
| Module resolution | 96 x 96 |
Video processing and signal transport are handled by Novastar DH7516-S receiving cards paired with a VX400 video processor. The processor accepts HDMI and DVI inputs, which covers the input formats most commonly specified for indoor corporate and press events.
The 3840Hz refresh rate is the system's most consequential attribute for camera work. At that frequency, scan lines are largely eliminated during capture, allowing the panel to be used as a clean background for high-definition broadcast and recorded video rather than merely as a live-audience display.
Power delivery follows a redundant architecture built around 5V 40A supplies, a design intended to sustain reliability over long operating hours and to reduce the risk of a single supply failure taking down a section of the wall. The package ships with flight cases, which provide the transport protection expected in rental environments where equipment is broken down and rebuilt repeatedly.
Although the system is designed around an EZ Setup approach to assembly, buyers and rental houses should note that truss mounting components and related installation hardware are not included in the package.
Before deployment, engineering teams should confirm that the venue's suspension structure can support the weight of the assembled cabinets. All LAN and power connections should be inspected in advance so that the redundant power configuration can operate as intended.
With a finished area of about 3.0 meters by 2.0 meters, the 12-cabinet build sits in the mid-size bracket, suited to indoor conferences, product launches, and presentation stages rather than large-scale arena work.
The combination of 2.604mm pitch and 3840Hz refresh positions the system for applications where the audience is relatively close to the screen and where the panel will appear on camera. Those two conditions, rather than raw brightness, are what define its practical operating range.
In the high-end event rental market, the stability of a display system and the quality of its image output are the decisive factors behind project delivery. This technical review examines a P2.604 LED display system built from 12 cabinets, outlining its configuration and performance envelope for rental operators and on-site technicians.
The system is assembled from die-cast aluminum cabinets measuring 500mm by 1000mm, producing an overall display area of roughly 3.0 meters wide by 2.0 meters high (9'10" by 6'7").
The cabinet structure is built around die-cast aluminum, a choice that supports both structural rigidity and heat dissipation during extended operation. Each cabinet measures 500mm by 1000mm, and the 12-cabinet configuration yields a display surface of approximately 3.0 meters by 2.0 meters.
At 2.604mm pixel pitch, the panel uses SMD1415 light-emitting diodes arranged across modules with a resolution of 96 by 96 pixels. The system is driven at a 1/32 scan rate and a refresh rate of 3840Hz.
| Parameter | Specification |
|---|---|
| Pixel pitch | 2.604mm |
| LED type | SMD1415 |
| Refresh rate | 3840Hz |
| Scan mode | 1/32 |
| Cabinet size | 500mm x 1000mm |
| Module resolution | 96 x 96 |
Video processing and signal transport are handled by Novastar DH7516-S receiving cards paired with a VX400 video processor. The processor accepts HDMI and DVI inputs, which covers the input formats most commonly specified for indoor corporate and press events.
The 3840Hz refresh rate is the system's most consequential attribute for camera work. At that frequency, scan lines are largely eliminated during capture, allowing the panel to be used as a clean background for high-definition broadcast and recorded video rather than merely as a live-audience display.
Power delivery follows a redundant architecture built around 5V 40A supplies, a design intended to sustain reliability over long operating hours and to reduce the risk of a single supply failure taking down a section of the wall. The package ships with flight cases, which provide the transport protection expected in rental environments where equipment is broken down and rebuilt repeatedly.
Although the system is designed around an EZ Setup approach to assembly, buyers and rental houses should note that truss mounting components and related installation hardware are not included in the package.
Before deployment, engineering teams should confirm that the venue's suspension structure can support the weight of the assembled cabinets. All LAN and power connections should be inspected in advance so that the redundant power configuration can operate as intended.
With a finished area of about 3.0 meters by 2.0 meters, the 12-cabinet build sits in the mid-size bracket, suited to indoor conferences, product launches, and presentation stages rather than large-scale arena work.
The combination of 2.604mm pitch and 3840Hz refresh positions the system for applications where the audience is relatively close to the screen and where the panel will appear on camera. Those two conditions, rather than raw brightness, are what define its practical operating range.